FTX RAMRAIDER 1/10 BRUSHLESS MONSTER TRUCK RTR - GREEN/BLUE

Ok folks, whos ready for some rip-roaring, ram-raiding off road bashing r/c fun? FTXs latest RamRaider 1/10th Monster Truck works with the established Rokatan chassis platform to deliver an exciting, fast and driv-able vehicle all in one complete ready-to-run package!
Powered by a Hobbywing 50A brushless speed control and 2500kv motor, coupled with the included Voltz 3S 3500mAh Lipo battery the RamRaider can reach impressive top speeds for its size, while still being very drivable on most surfaces. The rear mounted wheelie bar works to provide a sta-ble footing for those heavy accelerations when you light up the rear tyres.

Direct drive 4wd with slipper clutch, along with front and rear metal geared differentials and front CVA universal driveshafts help distribute the power to all corners

Oil filled aluminium shock absorbers along with a raised high clearance main chassis, with aluminium front and rear skid plates glide over most terrain effortlessly. Should you take a tumble, shock absorbing bumpers and moulded body roof and tail skid bar rails help protect from heavy damage when possible.

Aggressive pattern lug tyres mounted on stylish black spoked wheels deliver traction in abundance. Furthermore, if you are out so long having fun that the light starts to fade, fear not... the bumper mounted LED lights and LED roof bar will light the way!

Features

• 2.4ghz Radio System
• 3652 KV2500 Brushless Motor
• Waterproof 50A Brushless Speed Control
• Waterproof 10kg MG Steering Servo
• 3S 30C 3500mAH LiPo Battery
• LiPo Balance Charger
• High Ground Clearance Tub Main Chassis
• Front & Rear Aluminium Chassis Skid Plates
• Shock Absorbing Front & Rear Bumpers
• Pivot Ball Front Suspension
• Aluminium Oil Fill Shock Absorbers
• Adjustable Suspension Turnbuckles
• Full Ball Bearings
• Receiver Box
• Sealed Drivetrain with Slipper Unit
• Alloy Hinge pin Braces
• Metal Bevel Geared Differentials
• Front Universal CVA Driveshafts
• LED Roof Lightbar and bumper lights
• Stylish Impact Printed Body Graphics
• Moulded Roof and Tail Skid Bar Rails
• Rear Wheelie Bar
• Sealed transmission with removable cover and slipper clutch for drivetrain protection.
• Long throw adjustable double wishbone pivot ball front suspension.
• Long throw oil filled shock absorbers. Adjustable turnbuckles.
• Front and rear lower chassis aluminium skid plates.
• Raised chassis for higher ground clearance. Front and rear impact absorbing moulded bumpers.
• Etronix 2500kv brushless motor, Hobbywing brushless speed control and Voltz 3S 3500mAh LiPo battery provide speed and power.
• Front Universal CVA Driveshafts.

SPECIFICATIONS

Length: 480mm
Width: 350mm
Height: 200mm
Wheelbase: 270mm
Tyre: ø 125 x 70mm
Gear Ratio: 8.3:1

REQUIRED TO COMPLETE

• 4 x AA Batteries