These self-contained units are designed to be simple to install.They are powered from your models receiver and do not require separate servos or tricky linkages.
Note: Mains and Nose retracts are sold separately.
The main retracts are supplied with sprung oleo struts installed, plus wheel axles, hex wrenches and a 3-into-1 wiring harness.
The length of the oleos can be cut down by up to 50mm from the standard length.
The nose gear unit is steerable and is fitted with ball links to allow the installation of steering cables that slacken when the wheel is retracted and is supplied with wheel axle, wheel collar and hex wrenches.
Specifications
- Current draw at idle: 12mA
- Operating current 500-700mA (full stall 1.4-1.6A)
- Pulse width trigger points: Down 1.205ms, Up 1.786ms
- Operation with FM and DSM
- FM 22ms frame rate, 5V signal
- DSM 20ms frame rate, 3.3V signal
- Sequence time: @ 6.0V 4.0sec, @ 7.4V 3.5sec
- Operating voltage range: 6.0 7.4V
- Aircraft weight: 6.5kg 9.0kg
Unit weight:
- Nose gear 122g, Strut 113g
No reviews have been left for this product, be the first to
leave a review