The Maverick Quantum MT is a rugged 4WD Shaft-Driven, low slung dirt truck built to tear up any terrain and cause a splash in its super eye-catching livery! With independent Double Wishbone Suspension, Oil Filled Adjustable Coilover Shocks and Tough Metal 4-Gear Differentials Front & Rear, no amount of dirt or jumps will stand in your way!
Pushing the boundries of quality and performance and reaching heights never before seen with Maverick brand, the whole range of Quantum kits benefit from a new Molded Tub Chassis with Hex Pattern Reinforcement, oversized 2.8" wheel design and an adjustable wheelie bar fitted as standard.
With the Maverick Quantum MT you not only get a powerful 4WD truck with more than enough speed to wow yourself and your friends - it's also in a tough enough package to withstand plenty of bumps and crashes along the way!
UNLEASH THE BEAST FOR SOME CRAZY ACTION!
The Quantum MT comes preloaded with the MM-550 15T Brushed electric 550 high torque motor powering a tough shaft drivetrain spinning all 4 wheels for awesome 4WD action. While the waterproof ESC, water-resistant servo and gear cover mean the fun keeps coming and water or debris won't stand in your way!
EASY TO DRIVE WITH A REAL STEERING WHEEL CONTROLLER!
Anyone who has used a Maverick RC vehicle before will tell you that the MTX-244 transmitter makes for a fantastic driving experience with great throttle and steering response. When it comes to the Maverick 2.4GHz radio system we cut no corners on quality or feel
SUPER-CONVENIENT CHARGING ON THE GO!
Everything you need to get your Quantum XT up and running is included in the box with a 7.2V 2000mAh Maverick Element + NiMH battery pack and super-convenient Delta-Peak USB charger! Meaning you can charge your RC car battery with virtually any mobile phone wall charger!
IT'S SO EASY AND FUN TO DRIVE!
To drive the Quantum XT, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel its as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the car, gently push away from you with your left index finger - then release and push away again to go into reverse. It takes seconds to get used to this easy operation, and pretty soon you'll be racing with your friends!
INTRODUCING TREDZ TYRES BY HPI RACING
We're proud to announce the fantastic Quantum range features the first two tyres in our new TREDZ range. Fully bespoke with compound, profile and tread patterns that are designed and specified by HPI Racing. Wrapped in high quality, high grip rubber.
Tredz Tyres by HPI Racing are also available to purchase to upgrade the look and performance of any RC vehicle with 12mm Hex Hub wheel fittings. Look out for more tyres joining the Tredz family soon!
ADJUSTABLE WHEELY BAR AS STANDARD!!
When it comes to stunts, jumps and speedruns we've thought of everything with the Quantum family of vehicles. For the first time under the Maverick brand we've pre-installed this sturdy, adjustable wheely bar across the Quantum range. Now you can bust out the longest wheelies on command! Simply pull the trigger and watch it go!
SUPERIOR SUSPENSION FOR SUPERB HANDLING
Featuring independent double wishbone suspension front and rear, oil filled coilover shocks, pillow ball suspension uprights on all four corners and adjustable steel turnbuckle links, you can drive in any terrain with confidence and complete control.
Every Maverick Quantum kit features a fully detailed and painted body with a design that not only looks amazing, it provides additional protection for the chassis components.
MM-550 15T Electric Motor
The MM-550 15T Electric Motor is the most powerful brushed motor in the Maverick line-up! If you're looking for an easy to use power boost for your off-road racer or touring car RC, this is the motor you've been looking for!
The large 550 can size means you'll get extra torque for excellent acceleration and "pop" over jumps, while the 15-turn construction gives you great top speeds.
Features standard motor mounting screw locations for an easy drop-in fit for most 1/10th scale RC kits.
Note: if replacing a standard motor in most RTR vehicles, you will need to alter the spur gear and pinion gear to match the extra power and RPM of this motor. Check your speed controller to make sure it can work properly with brushed type motors with 15 turns or less.
The MSC-30BR-WP is a durable speed controller that is suitable for RC vehicles of all type! Whether you've got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The MSC-30BR-WP is also fully waterproof, making it the a great choice for anyone who enjoys playing in wet conditions.
#MV30001 - MSC-30BR-WP BRUSHED SPEED CONTROLLER
The MSC-30BR-WP can handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, and features a safety cut-off to protect your LiPo batteries.
- 2S or 3S LiPo with voltage protection
- 5-9 cell NiMH or NiCd
- Suitable for all types of 1/10th scale vehicles
- Forward Continuous Current: 40A
- Forward Burst Current: 180A
- Reverse Continuous Current: 20A
- Reverse Burst Current: 90A
- Input: 2-3S LiPo, 5-9 cell NiMH/NiCd
- Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat
- Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v
- Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v
- Resistance: FWD 0.002 Ohm, BWD 0.004 Ohm
- PWM Frequency: 1 KHz
- Dimensions: 46.5x34x28.5mm
- Weight: 65g
#150166 - MS-06WR Servo (Water-Resistant/6.0V/6kg/Plastic Geared)
Download PDF instructions for #MV30001 (2.5 MB)
This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles).
- Operating Voltage: 6V
- 6V: Speed: 0.22 sec/60 degrees, Torque: 5.5kg-cm
- Servo Spline: 25T
Main case: 40.0x37.5x20.0mm (excluding mounting tabs, servo spline, & cable outlet)
Mounting tab hole centres: 48.5x10.0mm
Weight: 45g (excluding servo horn)
NOTE: This servo is water-resistant only, meaning it is resistant to splashes and brief contact with water. It is not waterproof and therefore not suitable for submerged used. Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.
#MV22782 - MTX-244 MAVERICK 2.4GHZ 3CH TRANSMITTER
The Maverick MTX-244 is a lightweight pistol style radio with a steering wheel control for realistic driving and a trigger control for intuitive acceleration and braking of your car. For safety, the MTX-244 uses the latest 2.4GHz radio technology to make the radio signal nearly impervious to signal leakage or interference, and for ultimate peace of mind you can set the MRX-244 receiver to use the extra-safe failsafe function, useful just in case of a loss of signal.
The MTX-244 features:
- Ergonomic pistol grip design
- Easy access to dials & switches
- No external aerial to bend or break
- Lightweight due to using only 4 AA batteries
- Realistic steering wheel
- Forward-reverse trigger function
- Steering & throttle trim dials
- Steering & throttle end point (EPA) adjustment for ultimate fine-tuning
- Steering & throttle reverse switches make it easy to use the radio in different models
- Convenient charging point removes need to take batteries out of radio for charging
- Bright power LED light
- Use with #MV22783 MRX-244 2.4 GHz 3Ch Receiver only
Download PDF instructions for #MV22782 (1.9 MB)
CAR OVERALL FEATURES:
- MM-550 15T Brushed electric 550 high torque motor
- MSC-30BR-WP forward/reverse waterproof speed control with 12-turn brushed motor limit
- LiPo-compatible speed controller (see manual for instructions how to change between NiMH & LiPo modes) with LiPo safety cut-off
- 2000mAh Ni-MH battery included with standard white battery plug
- MS-06WR high-strength water resistant steering servo
- MTX/MRX-244 2.4GHz transmitter and receiver with built-in failsafe
- Molded Tub Chassis with Hex Pattern Reinforcement
- Fully adjustable suspension
- Oil-filled rebuildable shocks with coil-over springs
- Aluminum gold anodised shock tops
- Independent Double Wishbone Suspension
- Tough C-hub front steering knuckles
- Tough efficient 4wd shaft drivetrain
- Complete Set of Ball Bearings
- Pre-cut body factory-finished
- Fully adjustable turnbuckles all round
- Front and rear molded bumpers
- Dual Point Bell Crank Steering System With Integrated Servo Saver
- Aluminum gold anodized motor heatsink
- Gear cover to keep debris away from the spur gear
- 7.2V 2000mAh Ni-MH battery stick pack
- USB Charger included (2A input recommended)
4 x AA Batteries